ZHCS224B April 2011 – February 2024 SN74AHC1G86-Q1
PRODUCTION DATA
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the table.
Each VCC pin must have a good bypass capacitor to prevent power disturbance. For devices with a single supply, 0.1μF is recommended. If there are multiple VCC pins, 0.01μF or 0.022μF is recommended for each power pin. It is acceptable to parallel multiple bypass caps to reject different frequencies of noise. A 0.1μF and 1μF are commonly used in parallel. The bypass capacitor must be installed as close to the power pin as possible for best results.