ZHCSG68F MARCH   2017  – JANUARY 2019 TPSM846C23

PRODUCTION DATA.  

1. 1 特性
2. 2 應用
3. 3 說明
   1.     Device Images
      1.      簡化電路原理圖
      2.      效率與輸出電流間的關系
4. 4 修訂歷史記錄
5. 5 Pin Configuration and Functions
   1.     Pin Functions
6. 6 Specifications
   1. 6.1 Absolute Maximum Ratings
   2. 6.2 ESD Ratings
   3. 6.3 Recommended Operating Conditions
   4. 6.4 Thermal Information
   5. 6.5 Electrical Characteristics
   6. 6.6 Switching Characteristics
   7. 6.7 Programmable Characteristics
   8. 6.8 Typical Characteristics (VIN = 12 V)
   9. 6.9 Typical Characteristics (VIN = 5 V)
7. 7 Detailed Description
   1. 7.1 Overview
   2. 7.2 Functional Block Diagram
   3. 7.3 Feature Description
      1. 7.3.1  PMBus
         1. 7.3.1.1 PMBus General Description
         2. 7.3.1.2 PMBus Address
         3. 7.3.1.3 PMBus Connections
         4. 7.3.1.4 Supported PMBus Commands
      2. 7.3.2  Minimum Capacitance Requirements
      3. 7.3.3  Setting the Compensation Network
      4. 7.3.4  Transient Response
      5. 7.3.5  Setting the Output Voltage via PMBus
      6. 7.3.6  Setting the Output Voltage Without PMBus
      7. 7.3.7  Differential Remote Sense
      8. 7.3.8  Voltage Reference
      9. 7.3.9  Switching Frequency and Synchronization
         1. 7.3.9.1 Setting the Switching Frequency
         2. 7.3.9.2 Synchronization
            1. 7.3.9.2.1 Stand-Alone Device
            2. 7.3.9.2.2 Paralleled Devices
      10. 7.3.10 Input Undervoltage Lockout (UVLO)
      11. 7.3.11 Turnon and Turnoff Delay and Sequencing
      12. 7.3.12 Soft-Start Time and TON_RISE Command
      13. 7.3.13 Soft-Stop Time and TOFF_FALL Command
      14. 7.3.14 Prebiased Output Start-Up
      15. 7.3.15 Power Good (PGOOD) Indicator
      16. 7.3.16 Linear Regulators BP3 and BP6
      17. 7.3.17 VREF_TRIM
      18. 7.3.18 MARGIN
      19. 7.3.19 Parallel Application
      20. 7.3.20 Parallel Operation
      21. 7.3.21 Telemetry
          1. 7.3.21.1 Output Current Telemetry
          2. 7.3.21.2 Output Voltage Telemetry
          3. 7.3.21.3 Junction Temperature Telemetry
      22. 7.3.22 Overtemperature Protection
      23. 7.3.23 Overcurrent Protection
      24. 7.3.24 Output Overvoltage and Undervoltage Protection
      25. 7.3.25 Fault Protection Responses
   4. 7.4 Device Functional Modes
      1. 7.4.1 Continuous Conduction Mode
      2. 7.4.2 Operation With CNTL Signal Control
      3. 7.4.3 Operation With OPERATION Control
      4. 7.4.4 Operation With CNTL and OPERATION Control
   5. 7.5 Register Maps
      1. 7.5.1  OPERATION (01h)
         1. 7.5.1.1 On Bit
         2. 7.5.1.2 Off Bit
         3. 7.5.1.3 Margin Bit
      2. 7.5.2  ON_OFF_CONFIG (02h)
         1. 7.5.2.1 pu Bit
         2. 7.5.2.2 cmd Bit
         3. 7.5.2.3 cpr Bit
         4. 7.5.2.4 pol Bit
         5. 7.5.2.5 cpa Bit
      3. 7.5.3  CLEAR_FAULTS (03h)
      4. 7.5.4  WRITE_PROTECT (10h)
         1. 7.5.4.1 bit5
         2. 7.5.4.2 bit6
         3. 7.5.4.3 bit7
      5. 7.5.5  STORE_DEFAULT_ALL (11h)
      6. 7.5.6  RESTORE_DEFAULT_ALL (12h)
      7. 7.5.7  STORE_USER_ALL (15h)
      8. 7.5.8  RESTORE_USER_ALL (16h)
      9. 7.5.9  CAPABILITY (19h)
      10. 7.5.10 SMBALERT_MASK (1Bh)
      11. 7.5.11 VOUT_MODE (20h)
          1. 7.5.11.1 Mode Bit
          2. 7.5.11.2 Exponent Bit
      12. 7.5.12 VOUT_COMMAND (21h)
          1. 7.5.12.1 Exponent
          2. 7.5.12.2 Mantissa
      13. 7.5.13 VOUT_MAX (24h)
          1. 7.5.13.1 Exponent
          2. 7.5.13.2 Mantissa
      14. 7.5.14 VOUT_TRANSITION_RATE (27h)
          1. 7.5.14.1 Exponent
          2. 7.5.14.2 Mantissa
      15. 7.5.15 VOUT_SCALE_LOOP (29h)
          1. 7.5.15.1 Exponent
          2. 7.5.15.2 Mantissa
      16. 7.5.16 VOUT_MIN (2Bh)
          1. 7.5.16.1 Exponent
          2. 7.5.16.2 Mantissa
      17. 7.5.17 VIN_ON (35h)
          1. 7.5.17.1 Exponent
          2. 7.5.17.2 Mantissa
      18. 7.5.18 VIN_OFF (36h)
          1. 7.5.18.1 Exponent
          2. 7.5.18.2 Mantissa
      19. 7.5.19 IOUT_CAL_OFFSET (39h)
          1. 7.5.19.1 Exponent
          2. 7.5.19.2 Mantissa
      20. 7.5.20 VOUT_OV_FAULT_RESPONSE (41h)
          1. 7.5.20.1 RSP[1] Bit
          2. 7.5.20.2 RS[2:0] Bits
          3. 7.5.20.3 TD[2:0] Bits
      21. 7.5.21 VOUT_UV_FAULT_RESPONSE (45h)
          1. 7.5.21.1 RSP[1] Bit
          2. 7.5.21.2 RS[2:0] Bits
          3. 7.5.21.3 TD[2:0] Bits
      22. 7.5.22 IOUT_OC_FAULT_LIMIT (46h)
          1. 7.5.22.1 Exponent
          2. 7.5.22.2 Mantissa
      23. 7.5.23 IOUT_OC_FAULT_RESPONSE (47h)
          1. 7.5.23.1 RSP[1:0] Bits
          2. 7.5.23.2 RS[2:0] Bits
          3. 7.5.23.3 TD[2:0] Bits
      24. 7.5.24 IOUT_OC_WARN_LIMIT (4Ah)
          1. 7.5.24.1 Exponent
          2. 7.5.24.2 Mantissa
      25. 7.5.25 OT_FAULT_LIMIT (4Fh)
          1. 7.5.25.1 Exponent
          2. 7.5.25.2 Mantissa
      26. 7.5.26 OT_FAULT_RESPONSE (50h)
          1. 7.5.26.1 RSP[1] Bit
          2. 7.5.26.2 RS[2:0] Bits
          3. 7.5.26.3 TD[2:0] Bits
      27. 7.5.27 OT_WARN_LIMIT (51h)
          1. 7.5.27.1 Exponent
          2. 7.5.27.2 Mantissa
      28. 7.5.28 TON_DELAY (60h)
          1. 7.5.28.1 Exponent
          2. 7.5.28.2 Mantissa
      29. 7.5.29 TON_RISE (61h)
          1. 7.5.29.1 Exponent
          2. 7.5.29.2 Mantissa
      30. 7.5.30 TON_MAX_FAULT_LIMIT (62h)
          1. 7.5.30.1 Exponent
          2. 7.5.30.2 Mantissa
      31. 7.5.31 TON_MAX_FAULT_RESPONSE (63h)
          1. 7.5.31.1 RSP[1] Bit
          2. 7.5.31.2 RS[2:0] Bits
          3. 7.5.31.3 TD[2:0] Bits
      32. 7.5.32 TOFF_DELAY (64h)
          1. 7.5.32.1 Exponent
          2. 7.5.32.2 Mantissa
      33. 7.5.33 TOFF_FALL (65h)
          1. 7.5.33.1 Exponent
          2. 7.5.33.2 Mantissa
      34. 7.5.34 STATUS_BYTE (78h)
      35. 7.5.35 STATUS_WORD (79h)
      36. 7.5.36 STATUS_VOUT (7Ah)
      37. 7.5.37 STATUS_IOUT (7Bh)
      38. 7.5.38 STATUS_INPUT (7Ch)
      39. 7.5.39 STATUS_TEMPERATURE (7Dh)
      40. 7.5.40 STATUS_CML (7Eh)
      41. 7.5.41 STATUS_MFR_SPECIFIC (80h)
      42. 7.5.42 READ_VOUT (8Bh)
          1. 7.5.42.1 Exponent
          2. 7.5.42.2 Mantissa
      43. 7.5.43 READ_IOUT (8Ch)
          1. 7.5.43.1 Exponent
          2. 7.5.43.2 Mantissa
      44. 7.5.44 READ_TEMPERATURE_1 (8Dh)
          1. 7.5.44.1 Exponent
          2. 7.5.44.2 Mantissa
      45. 7.5.45 PMBUS_REVISION (98h)
      46. 7.5.46 IC_DEVICE_ID (ADh)
      47. 7.5.47 IC_DEVICE_REV (AEh)
      48. 7.5.48 MFR_SPECIFIC_00 (D0h)
      49. 7.5.49 VREF_TRIM (MFR_SPECIFIC_04) (D4h)
      50. 7.5.50 STEP_VREF_MARGIN_HIGH (MFR_SPECIFIC_05) (D5h)
      51. 7.5.51 STEP_VREF_MARGIN_LOW (MFR_SPECIFIC_06) (D6h)
      52. 7.5.52 PCT_OV_UV_WRN_FLT_LIMITS (MFR_SPECIFIC_07) (D7h)
      53. 7.5.53 OPTIONS (MFR_SPECIFIC_21) (E5h)
          1. 7.5.53.1  DIS_NEGILIM Bit
          2. 7.5.53.2  EN_RESET_B Bit
          3. 7.5.53.3  EN_ADC_CNTL Bit
          4. 7.5.53.4  VSM Bit
          5. 7.5.53.5  DLO Bit
          6. 7.5.53.6  AVG_PROG[1:0] Bits
          7. 7.5.53.7  EN_AUTO_ARA Bit
          8. 7.5.53.8  READ_VOUT_RANGE[1:0] Bits
          9. 7.5.53.9  RST_VOUT_oSD Bit
          10. 7.5.53.10 RSMLO_VAL Bit
          11. 7.5.53.11 RSMHI_VAL Bit
      54. 7.5.54 MISC_CONFIG_OPTIONS (MFR_SPECIFIC_32) (F0h)
          1. 7.5.54.1 OV_RESP_SEL Bit
          2. 7.5.54.2 HSOC_USER_TRIM[1:0] Bits
          3. 7.5.54.3 EN_AVS_USER Bit
          4. 7.5.54.4 FORCE_SYNC_OUT Bit
          5. 7.5.54.5 FORCE_SYNC_IN Bit
          6. 7.5.54.6 SYNC_FAULT_DIS Bit
8. 8 Application and Implementation
   1. 8.1 Typical Application
      1. 8.1.1 Design Requirements
      2. 8.1.2 Detailed Design Procedure
         1. 8.1.2.1 Custom Design With WEBENCH® Tools
         2. 8.1.2.2 Setting the Output Voltage
         3. 8.1.2.3 Input and Output Capacitance
         4. 8.1.2.4 Selecting the Compensation Components
         5. 8.1.2.5 Setting the Switching Frequency
         6. 8.1.2.6 Power Good (PGOOD)
         7. 8.1.2.7 ON/OFF Control (CNTL)
      3. 8.1.3 Application Curves
9. 9 Power Supply Recommendations
10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
    3. 10.3 Package Specifications
    4. 10.4 EMI
    5. 10.5 Mounting and Thermal Profile Recommendation
11. 11器件和文檔支持
    1. 11.1 器件支持
       1. 11.1.1 開發支持
          1. 11.1.1.1 使用 WEBENCH® 工具創建定制設計
    2. 11.2 文檔支持
       1. 11.2.1 相關文檔
    3. 11.3 接收文檔更新通知
    4. 11.4 社區資源
    5. 11.5 商標
    6. 11.6 靜電放電警告
    7. 11.7 術語表
12. 12機械、封裝和可訂購信息
    1. 12.1 Tape and Reel Information