ZHCSPJ6A October   2022  – November 2022 LMK04832-SEP

PRODUCTION DATA  

1. 1 特性
2. 2 應(yīng)用
3. 3 說明
4. 4 Revision History
5. 5 Pin Configuration and Functions
6. 6 Specifications
   1. 6.1 Absolute Maximum Ratings
   2. 6.2 ESD Ratings
   3. 6.3 Recommended Operating Conditions
   4. 6.4 Thermal Information
   5. 6.5 Electrical Characteristics
   6. 6.6 Timing Requirements
   7. 6.7 Timing Diagram
   8. 6.8 Typical Characteristics
7. 7 Parameter Measurement Information
   1. 7.1 Charge Pump Current Specification Definitions
      1. 7.1.1 Charge Pump Output Current Magnitude Variation vs Charge Pump Output Voltage
      2. 7.1.2 Charge Pump Sink Current vs Charge Pump Output Source Current Mismatch
      3. 7.1.3 Charge Pump Output Current Magnitude Variation vs Ambient Temperature
   2. 7.2 Differential Voltage Measurement Terminology
8. 8 Detailed Description
   1. 8.1 Overview
      1. 8.1.1 Differences from the LMK04832
         1. 8.1.1.1 Jitter Cleaning
         2. 8.1.1.2 JEDEC JESD204B/C Support
      2. 8.1.2 Clock Inputs
         1. 8.1.2.1 Inputs for PLL1
         2. 8.1.2.2 Inputs for PLL2
         3. 8.1.2.3 Inputs When Using Clock Distribution Mode
      3. 8.1.3 PLL1
         1. 8.1.3.1 Frequency Holdover
         2. 8.1.3.2 External VCXO for PLL1
      4. 8.1.4 PLL2
         1. 8.1.4.1 Internal VCOs for PLL2
         2. 8.1.4.2 External VCO Mode
      5. 8.1.5 Clock Distribution
         1. 8.1.5.1 Clock Divider
         2. 8.1.5.2 High Performance Divider Bypass Mode
         3. 8.1.5.3 SYSREF Clock Divider
         4. 8.1.5.4 Device Clock Delay
         5. 8.1.5.5 Dynamic Digital Delay
         6. 8.1.5.6 SYSREF Delay: Global and Local
         7. 8.1.5.7 Programmable Output Formats
         8. 8.1.5.8 Clock Output Synchronization
      6. 8.1.6 0-Delay
      7. 8.1.7 Status Pins
   2. 8.2 Functional Block Diagram
   3. 8.3 Feature Description
      1. 8.3.1 Synchronizing PLL R Dividers
         1. 8.3.1.1 PLL1 R Divider Synchronization
         2. 8.3.1.2 PLL2 R Divider Synchronization
      2. 8.3.2 SYNC/SYSREF
      3. 8.3.3 JEDEC JESD204B/C
         1. 8.3.3.1 How to Enable SYSREF
            1. 8.3.3.1.1 Setup of SYSREF Example
            2. 8.3.3.1.2 SYSREF_CLR
         2. 8.3.3.2 SYSREF Modes
            1. 8.3.3.2.1 SYSREF Pulser
            2. 8.3.3.2.2 Continuous SYSREF
            3. 8.3.3.2.3 SYSREF Request
      4. 8.3.4 Digital Delay
         1. 8.3.4.1 Fixed Digital Delay
            1. 8.3.4.1.1 Fixed Digital Delay Example
         2. 8.3.4.2 Dynamic Digital Delay
         3. 8.3.4.3 Single and Multiple Dynamic Digital Delay Example
      5. 8.3.5 SYSREF to Device Clock Alignment
      6. 8.3.6 Input Clock Switching
         1. 8.3.6.1 Input Clock Switching - Manual Mode
         2. 8.3.6.2 Input Clock Switching - Pin Select Mode
         3. 8.3.6.3 Input Clock Switching - Automatic Mode
      7. 8.3.7 Digital Lock Detect (DLD)
         1. 8.3.7.1 Calculating Digital Lock Detect Frequency Accuracy
      8. 8.3.8 Holdover
         1. 8.3.8.1 Enable Holdover
            1. 8.3.8.1.1 Fixed (Manual) CPout1 Holdover Mode
            2. 8.3.8.1.2 Tracked CPout1 Holdover Mode
         2. 8.3.8.2 During Holdover
         3. 8.3.8.3 Exiting Holdover
         4. 8.3.8.4 Holdover Frequency Accuracy and DAC Performance
      9. 8.3.9 PLL2 Loop Filter
   4. 8.4 Device Functional Modes
      1. 8.4.1 DUAL PLL
         1. 8.4.1.1 Dual Loop
         2. 8.4.1.2 Dual Loop With Cascaded 0-Delay
         3. 8.4.1.3 Dual Loop With Nested 0-Delay
      2. 8.4.2 Single PLL
         1. 8.4.2.1 PLL2 Single Loop
         2. 8.4.2.2 PLL2 With External VCO
      3. 8.4.3 Distribution Mode
   5. 8.5 Programming
      1. 8.5.1 Recommended Programming Sequence
   6. 8.6 Register Maps
      1. 8.6.1 Register Map for Device Programming
      2. 8.6.2 Device Register Descriptions
         1. 8.6.2.1 System Functions
            1. 8.6.2.1.1 RESET, SPI_3WIRE_DIS
            2. 8.6.2.1.2 POWERDOWN
            3. 8.6.2.1.3 ID_DEVICE_TYPE
            4. 8.6.2.1.4 ID_PROD
            5. 8.6.2.1.5 ID_MASKREV
            6. 8.6.2.1.6 ID_VNDR
         2. 8.6.2.2 (0x100 - 0x138) Device Clock and SYSREF Clock Output Controls
            1. 8.6.2.2.1 DCLKX_Y_DIV
            2. 8.6.2.2.2 DCLKX_Y_DDLY
            3. 8.6.2.2.3 CLKoutX_Y_PD, CLKoutX_Y_ODL, CLKoutX_Y_IDL, DCLKX_Y_DDLY_PD, DCLKX_Y_DDLY[9:8], DCLKX_Y_DIV[9:8]
            4. 8.6.2.2.4 CLKoutX_SRC_MUX, DCLKX_Y_PD, DCLKX_Y_BYP, DCLKX_Y_DCC, DCLKX_Y_POL, DCLKX_Y_HS
            5. 8.6.2.2.5 CLKoutY_SRC_MUX, SCLKX_Y_PD, SCLKX_Y_DIS_MODE, SCLKX_Y_POL, SCLKX_Y_HS
            6. 8.6.2.2.6 SCLKX_Y_ADLY_EN, SCLKX_Y_ADLY
            7. 8.6.2.2.7 SCLKX_Y_DDLY
            8. 8.6.2.2.8 CLKoutY_FMT, CLKoutX_FMT
         3. 8.6.2.3 SYSREF, SYNC, and Device Config
            1. 8.6.2.3.1  VCO_MUX, OSCout_MUX, OSCout_FMT
            2. 8.6.2.3.2  SYSREF_REQ_EN, SYNC_BYPASS, SYSREF_MUX
            3. 8.6.2.3.3  SYSREF_DIV
            4. 8.6.2.3.4  SYSREF_DDLY
            5. 8.6.2.3.5  SYSREF_PULSE_CNT
            6. 8.6.2.3.6  PLL2_RCLK_MUX, PLL2_NCLK_MUX, PLL1_NCLK_MUX, FB_MUX, FB_MUX_EN
            7. 8.6.2.3.7  PLL1_PD, VCO_LDO_PD, VCO_PD, OSCin_PD, SYSREF_GBL_PD, SYSREF_PD, SYSREF_DDLY_PD, SYSREF_PLSR_PD
            8. 8.6.2.3.8  DDLYdSYSREF_EN, DDLYdX_EN
            9. 8.6.2.3.9  DDLYd_STEP_CNT
            10. 8.6.2.3.10 SYSREF_CLR, SYNC_1SHOT_EN, SYNC_POL, SYNC_EN, SYNC_PLL2_DLD, SYNC_PLL1_DLD, SYNC_MODE
            11. 8.6.2.3.11 SYNC_DISSYSREF, SYNC_DISX
            12. 8.6.2.3.12 PLL1R_SYNC_EN, PLL1R_SYNC_SRC, PLL2R_SYNC_EN, FIN0_DIV2_EN, FIN0_INPUT_TYPE
         4. 8.6.2.4 (0x146 - 0x149) CLKIN Control
            1. 8.6.2.4.1 CLKin_SEL_PIN_EN, CLKin_SEL_PIN_POL, CLKin2_EN, CLKin1_EN, CLKin0_EN, CLKin2_TYPE, CLKin1_TYPE, CLKin0_TYPE
            2. 8.6.2.4.2 CLKin_SEL_AUTO_REVERT_EN, CLKin_SEL_AUTO_EN, CLKin_SEL_MANUAL, CLKin1_DEMUX, CLKin0_DEMUX
            3. 8.6.2.4.3 CLKin_SEL0_MUX, CLKin_SEL0_TYPE
            4. 8.6.2.4.4 SDIO_RDBK_TYPE, CLKin_SEL1_MUX, CLKin_SEL1_TYPE
         5. 8.6.2.5 RESET_MUX, RESET_TYPE
         6. 8.6.2.6 (0x14B - 0x152) Holdover
            1. 8.6.2.6.1 LOS_TIMEOUT, LOS_EN, TRACK_EN, HOLDOVER_FORCE, MAN_DAC_EN, MAN_DAC[9:8]
            2. 8.6.2.6.2 MAN_DAC
            3. 8.6.2.6.3 DAC_TRIP_LOW
            4. 8.6.2.6.4 DAC_CLK_MULT, DAC_TRIP_HIGH
            5. 8.6.2.6.5 DAC_CLK_CNTR
            6. 8.6.2.6.6 CLKin_OVERRIDE, HOLDOVER_EXIT_MODE, HOLDOVER_PLL1_DET, LOS_EXTERNAL_INPUT, HOLDOVER_VTUNE_DET, CLKin_SWITCH_CP_TRI, HOLDOVER_EN
            7. 8.6.2.6.7 HOLDOVER_DLD_CNT
         7. 8.6.2.7 (0x153 - 0x15F) PLL1 Configuration
            1. 8.6.2.7.1 CLKin0_R
            2. 8.6.2.7.2 CLKin1_R
            3. 8.6.2.7.3 CLKin2_R
            4. 8.6.2.7.4 PLL1_N
            5. 8.6.2.7.5 PLL1_WND_SIZE, PLL1_CP_TRI, PLL1_CP_POL, PLL1_CP_GAIN
            6. 8.6.2.7.6 PLL1_DLD_CNT
            7. 8.6.2.7.7 HOLDOVER_EXIT_NADJ
            8. 8.6.2.7.8 PLL1_LD_MUX, PLL1_LD_TYPE
         8. 8.6.2.8 (0x160 - 0x16E) PLL2 Configuration
            1. 8.6.2.8.1 PLL2_R
            2. 8.6.2.8.2 PLL2_P, OSCin_FREQ, PLL2_REF_2X_EN
            3. 8.6.2.8.3 PLL2_N_CAL
            4. 8.6.2.8.4 PLL2_N
            5. 8.6.2.8.5 PLL2_WND_SIZE, PLL2_CP_GAIN, PLL2_CP_POL, PLL2_CP_TRI
            6. 8.6.2.8.6 PLL2_DLD_CNT
            7. 8.6.2.8.7 PLL2_LD_MUX, PLL2_LD_TYPE
         9. 8.6.2.9 (0x16F - 0x555) Misc Registers
            1. 8.6.2.9.1 PLL2_PRE_PD, PLL2_PD, FIN0_PD
            2. 8.6.2.9.2 PLL1R_RST
            3. 8.6.2.9.3 CLR_PLL1_LD_LOST, CLR_PLL2_LD_LOST
            4. 8.6.2.9.4 RB_PLL1_LD_LOST, RB_PLL1_LD, RB_PLL2_LD_LOST, RB_PLL2_LD
            5. 8.6.2.9.5 RB_DAC_VALUE (MSB), RB_CLKinX_SEL, RB_CLKinX_LOS
            6. 8.6.2.9.6 RB_DAC_VALUE
            7. 8.6.2.9.7 RB_HOLDOVER
            8. 8.6.2.9.8 SPI_LOCK
9. 9 Application and Implementation
   1. 9.1 Application Information
      1. 9.1.1 Treatment of Unused Pins
      2. 9.1.2 Frequency Planning and Spur Minimization
      3. 9.1.3 Digital Lock Detect Frequency Accuracy
         1. 9.1.3.1 Minimum Lock Time Calculation Example
      4. 9.1.4 Driving CLKIN AND OSCIN Inputs
         1. 9.1.4.1 Driving CLKIN and OSCIN PINS With a Differential Source
         2. 9.1.4.2 Driving CLKIN Pins With a Single-Ended Source
      5. 9.1.5 OSCin Doubler for Best Phase Noise Performance
      6. 9.1.6 Radiation Environments
         1. 9.1.6.1 Total Ionizing Dose
         2. 9.1.6.2 Single Event Effect
   2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
         1. 9.2.2.1 Device Selection
            1. 9.2.2.1.1 Clock Architect
         2. 9.2.2.2 Device Configuration and Simulation
         3. 9.2.2.3 Device Setup
      3. 9.2.3 Application Curve
   3. 9.3 Power Supply Recommendations
      1. 9.3.1 Current Consumption
      2. 9.3.2 Cold Sparing Considerations
         1. 9.3.2.1 Damage Prevention Details to Unpowered Device
   4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
      3. 9.4.3 Thermal Management
10. 10Device and Documentation Support
    1. 10.1 Device Support
       1. 10.1.1 Development Support
          1. 10.1.1.1 Clock Architect
          2. 10.1.1.2 PLLatinum Simulation
          3. 10.1.1.3 TICS Pro
    2. 10.2 Documentation Support
       1. 10.2.1 Related Documentation
    3. 10.3 接收文檔更新通知
    4. 10.4 支持資源
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 術(shù)語表
11. 11Mechanical, Packaging, and Orderable Information