4 修訂歷史記錄

Changes from E Revision (March 2014) to F Revision

• Changed Figure 22 image and CH3 scale from: 100 V/div To 2 V/divGo
• Changed Figure 23 CH3 scale from: 100 V/div To 2 V/divGo

Changes from D Revision (November 2013) to E Revision

• 已將數據表更改為全新的 TI 標準格式Go
• 已添加器件信息表 Go
• Added the Handling Ratings tableGo
• Added the Detailed Description sectionGo
• Changed Figure 17Go
• Added the Applications and Implementation sectionGo
• Deleted the Application Information sectionGo
• Added the Power Supply RecommendationsGo
• Added the Layout section Go

Changes from C Revision (November 2013) to D Revision

• 已將特性從：小型 3mm x 3mm 超薄四方扁平無引線 (VQFN) 封裝更改為：小型 3mm x 3mm 小外形尺寸無引線 (SON) 封裝Go
• 已將特性從：總線引腳保護：更改為：總線引腳保護大于Go
• 已將特性從：≤ 15kV 更改為：±15kV HBM 保護Go
• 已將特性從：≤ 15kV 更改為：±16kV 接觸放電Go
• 已將特性從：≤ 15kV 更改為：±16kV 空氣放電Go
• 已將說明文本從：3mm x 3mm，VQFN 封裝更改為：3mm x 3mm，SON 封裝Go
• Changed the ABSOLUTE MAXIMUM RATINGS for IEC 61000-4-2 ESD (Air-Gap Discharge) From MAX = ±15 To: MAX = ±16Go
• Changed the ABSOLUTE MAXIMUM RATINGS for IEC 61000-4-2 ESD (Contact Discharge) From MAX = ±15 To: MAX = ±16Go
• Changed the Thermal Information table package From VQFN (DRC) To; SON (DRC)Go

Changes from B Revision (October 2013) to C Revision

• Changed 從產品預覽改為生產數據Go

Changes from A Revision (October 2013) to B Revision

• Added 8 Typical Characteristics curvesGo

Changes from * Revision (July 2013) to A Revision

• 已將特性從：針對數據和使能信號的 1.8V 至 3.3V 電源更改為：針對數據和使能信號的 1.65V 至 3.6V 電源Go
• 已將特性從：針對總線信號的 3.3V 電源更改為：針對總線信號的 3V 至 3.6V 電源Go
• 已將特性從：可選數據速率：250ksps 或 20Mbps 更改為：SLR 引腳可選數據速率：250ksps 或 20MbpsGo
• 已更改應用范圍列表Go
• 已更改說明Go
• 在典型應用電路中，已將：100Ω 電阻器更改為：120Ω 電阻器Go
• Changed the ELECTRICAL CHARACTERISTICS table valuesGo
• Changed the SWITCHING CHARACTERISTICS table valuesGo
• Changed V_CC and 3 V to V_L in Figure 9 through Figure 16Go
• Changed Figure 17Go