ZHCSZC2H October 1997 – December 2025 TL3472
PRODUCTION DATA
請參考 PDF 數據表獲取器件具體的封裝圖。
| 參數 | 測試條件 | TA | 最小值 | 典型值(1) | 最大值 | 單位 | |||
|---|---|---|---|---|---|---|---|---|---|
| VIO | 輸入偏移電壓 |
VIC = 0， VO = 0， RS = 50Ω |
VCC = 5V | 25°C | 1.5 | 10 | mV | ||
| VCC = ±15V | 25°C | 1.0 | 10 | ||||||
| 完整范圍(2) | 12 | ||||||||
| aVIO | 輸入失調電壓的溫度系數 | VCC = ±15V | 完整范圍(2) | 10 | μV/°C | ||||
| IIO | 輸入失調電流 | VCC = ±15V | 25°C | 0.01 | 75 | nA | |||
| 完整范圍(2) | 300 | ||||||||
| IIB | 輸入偏置電流 | VCC = ±15V | 25°C | 0.01 | 500 | nA | |||
| 完整范圍(2) | 700 | ||||||||
| VICR | 共模輸入電壓范圍 | RS = 50Ω | 25°C |
-15 到 12.8 |
V | ||||
| 完整范圍(2) |
-15 到 12.8 |
||||||||
| VOH | 高電平輸出電壓 | VCC+ = 5V | VCC– = 0， | RL = 2kΩ | 25°C | 3.7 | 4.8 | V | |
| RL = 10kΩ | 25°C | 13.6 | 14.8 | ||||||
| RL = 2kΩ | 完整范圍(2) | 13.4 | |||||||
| VOL | 低電平輸出電壓 | VCC+ = 5V | VCC– = 0， | RL = 2kΩ | 25°C | 0.005 | 0.3 | V | |
| RL = 10kΩ | 25°C | -14.8 | -14.3 | ||||||
| RL = 2kΩ | 完整范圍(2) | -13.5 | |||||||
| AVD | 大信號差分電壓放大 | VO = ±10V， | RL = 2kΩ | 25°C | 25 | 100 | V/mV | ||
| 完整范圍(2) | 20 | ||||||||
| IOS | 短路輸出電流 | 來源：VID = 1 V， | VO = 0 | 25°C | -10 | -75 | mA | ||
| 灌電流：VID =?1V， | VO = 0 | 20 | 75 | ||||||
| CMRR | 共模抑制比 | VIC = VICR（最小值）， | RS = 50Ω | 25°C | 65 | 97 | dB | ||
| kSVR | 電源電壓抑制比 (ΔVCC±/ΔVIO) | VCC± = ±13.5 V 至 ±16.5 V， | RS = 100Ω | 25°C | 70 | 97 | dB | ||
| ICC | 電源電流 （每個通道） |
VO = 0， | 無負載 | 25°C | 0.56 | 4.5 | mA | ||
| 完整范圍(2) | 5.5 | ||||||||
| VCC+ = 5V，VO = 2.5V，VCC– = 0，空載 | 25°C | 4.5 | |||||||