SLVU719B May   2012  – November 2021

1.   Trademarks
2. 1 Description
   1. 1.1 Typical Applications
   2. 1.2 Features
3. 2 Electrical Performance Specifications
4. 3 Schematic
5. 4 Test Setup
   1. 4.1 Test and Configuration Software
      1. 4.1.1 Description
      2. 4.1.2 Features
   2. 4.2 Test Equipment
   3. 4.3 Recommended Test Setup
      1. 4.3.1 Input Connections
      2. 4.3.2 Output Connections
      3. 4.3.3 Other Connections
   4. 4.4 List of Test Points
   5. 4.5 Jumper Configuration: Enable Selection
6. 5 EVM Configuration Using the Fusion GUI
   1. 5.1 Configuration Procedure
   2. 5.2 Default Fusion GUI Screenshots and Description
7. 6 Test Procedure
   1. 6.1 Line and Load Regulation and Efficiency Measurement Procedure
   2. 6.2 Control Loop Gain and Phase Measurement Procedure
   3. 6.3 Equipment Shutdown
8. 7 Performance Data and Typical Characteristic Curves
   1. 7.1  Efficiency
   2. 7.2  Load Regulation
   3. 7.3  Line Regulation
   4. 7.4  fSW Versus Load
   5. 7.5  Bode Plot
   6. 7.6  Transient Response
   7. 7.7  Output Ripple
   8. 7.8  Switching Node
   9. 7.9  Turn-On Waveform
   10. 7.10 Turn-Off Waveform
   11. 7.11 Pre-bias Turn-On Waveform
   12. 7.12 Thermal Images
9. 8 EVM Assembly Drawing and PCB layout
10. 9 Bill of Materials
11. 10Revision History