DS90CF384
- 20 to 65 MHz shift clock support
- Programmable transmitter (DS90C383) strobe select
(Rising or Falling edge strobe) - Single 3.3V supply
- Chipset (Tx + Rx) power consumption < 250 mW (typ)
- Power-down mode (< 0.5 mW total)
- Single pixel per clock XGA (1024x768) ready
- Supports VGA, SVGA, XGA and higher addressability.
- Up to 227 Megabytes/sec bandwidth
- Up to 1.8 Gbps throughput
- Narrow bus reduces cable size and cost
- 290 mV swing LVDS devices for low EMI
- PLL requires no external components
- Low profile 56-lead TSSOP package.
- DS90CF384 also available in 64 ball, 0.8mm fine pitch
ball grid array(FBGA) package - Falling edge data strobe Receiver
- Compatible with TIA/EIA-644 LVDS standard
- ESD rating >7 kV
- Operating Temperature: –40°C to +85°C
The DS90C383 transmitter converts 28 bits of CMOS/TTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. The DS90CF384 receiver converts the LVDS data streams back into 28 bits of CMOS/TTL data. At a transmit clock frequency of 65 MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughputs is 227 Mbytes/sec. The transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge transmitter will inter-operate with a Falling edge receiver (DS90CF384) without any translation logic. The DS90CF384 is also offered in 64 ball, 0.8mm fine pitch ball grid array(FBGA) package which provides a 44 % reduction in PCB footprint (available Q3, 1999).
This chipset is an ideal means to solve EMI and cable size problems associated with wide, high speed TTL interfaces.
技術文檔
| 頂層文檔 | 類型 | 標題 | 格式選項 | 下載最新的英語版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 數據表 | DS90C383/F384 3.3VProg LVDS Trans 24Bit FPD, 65MHz,3.3VLVDS Rcvr 24Bit FPD 65MHz 數據表 (Rev. A) | 2004年 5月 13日 | |||
| 應用手冊 | How to Map RGB Signals to LVDS/OpenLDI(OLDI) Displays (Rev. A) | 2018年 6月 29日 | ||||
| 應用手冊 | AN-1032 An Introduction to FPD-Link (Rev. C) | 2017年 8月 8日 | ||||
| 應用手冊 | Receiver Skew Margin for Channel Link I and FPD Link I Devices | 2016年 1月 13日 | ||||
| 應用手冊 | TFT Data Mapping for Dual Pixel LDI Application - Alternate A - Color Map | 2004年 5月 15日 | ||||
| 應用手冊 | AN-1056 STN Application Using FPD-Link | 2004年 5月 14日 | ||||
| 應用手冊 | AN-1085 FPD-Link PCB and Interconnect Design-In Guidelines | 2004年 5月 14日 |
設計與開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
FLINK3V8BT-85 — 用于 FPD 鏈接系列串行器和解串器 LVDS 器件的評估套件
FPD-Link evaluation kit contains a Transmitter (Tx) board, a Receiver (Rx) board along with interfacing cables. This kit will demonstrate the chipsets interfacing from test equipment or a graphics controller using Low Voltage Differential Signaling (LVDS) to a receiver board.
The Transmitter board (...)
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模擬仿真程序
TINA-TI 安裝需要大約 500MB。直接安裝,如果想卸載也很容易。我們相信您肯定會愛不釋手。
TINA 是德州儀器 (TI) 專有的 DesignSoft 產品。該免費版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需獲取可用 TINA-TI 模型的完整列表,請參閱:SpiceRack - 完整列表
需要 HSpice (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| TSSOP (DGG) | 56 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。