TS5V330C
- Low Differential Gain and Phase
(Typical DG = 0.24%, Typical DP = 0.039°) - Wide Bandwidth (Typical BW > 288 MHz)
- Low Cross-Talk (Typical XTALK = –87 dB)
- Low Power Consumption
(Maximum ICC = 3 μA) - Bidirectional Data Flow, With Near-Zero Propagation Delay
- Low ON-State Resistance (Typical rON = 3
) - VCC Operating Range From 4.5 V to 5.5 V
- Ioff Supports Partial-Power-Down Mode Operation
- Data and Control Inputs Provide Undershoot Clamp Diode
- Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model
(A114-B, Class II) - 1000-V Charged-Device Model (C101)
- 2000-V Human-Body Model
- Suitable for Both RGB and Composite Video Switching
The TS5V330C is a 4-bit 1-of-2 multiplexer/demultiplexer video switch with a single switch-enable (EN) input. The select (IN) input controls the data path of the multiplexer/demultiplexer. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and a high impedance state exists between the D and S ports.
Low differential gain and phase makes this switch ideal for video applications. The device has a wide bandwidth and low cross talk which makes it suitable for high frequency video applications. The device can be used for RGB and composite video switching applications.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, EN should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
技術文檔
| 頂層文檔 | 類型 | 標題 | 格式選項 | 下載最新的英語版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 數據表 | 4 Bit 1-of-2 FET Multiplexer/Demultiplexer 數據表 (Rev. B) | 2009年 12月 3日 |
設計與開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
LEADED-ADAPTER1 — 表面貼裝轉 DIP 接頭適配器,用于快速測試 TI 的 5、8、10、16 和 24 引腳引線式封裝。
EVM-LEADED1 電路板可用于對 TI 的常見引線式封裝進行快速測試和電路板試驗。? 該電路板具有足夠的空間,可將 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面貼裝封裝轉換為 100mil DIP 接頭。?????
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| SOIC (D) | 16 | Ultra Librarian |
| SSOP (DBQ) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。