產品詳情

Vs ABS (max) (V) 11.8 Vs (min) (V) 2.5 Peak output current (A) 2 Control mode PH/EN, STEP/DIR Control interface Hardware (GPIO) Number of full bridges 2 Full-scale current (A) 1.5 RDS(ON) (HS + LS) (mΩ) 305 Sleep current (μA) 0.6 Microstepping levels 32 Decay mode Mixed Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
Vs ABS (max) (V) 11.8 Vs (min) (V) 2.5 Peak output current (A) 2 Control mode PH/EN, STEP/DIR Control interface Hardware (GPIO) Number of full bridges 2 Full-scale current (A) 1.5 RDS(ON) (HS + LS) (mΩ) 305 Sleep current (μA) 0.6 Microstepping levels 32 Decay mode Mixed Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (PWP) 24 49.92 mm2 7.8 x 6.4 VQFN (RGE) 24 16 mm2 4 x 4
  • Dual-H-Bridge Current-Control Motor Driver
    • Capable of Driving Two DC Motors or One
      Stepper Motor
  • Two Control Modes:
    • Built-In Indexer Logic With Simple
      STEP/DIRECTION Control and Up to
      1/32-Step Microstepping
    • PHASE/ENABLE Control, With the Ability to
      Drive External References for > 1/32-Step
      Microstepping
  • Output Current 1.5-A Continuous, 2.2-A Peak per
    H-Bridge (at VM = 5 V, 25°C)
  • Low RDS(ON): 305-mΩ HS + LS
    (at VM = 5 V, 25°C)
  • Wide Power Supply Voltage Range:
    2.5 V to 10.8 V
  • Dynamic tBLANK and Mixed Decay Modes for
    Smooth Microstepping
  • PWM Winding Current Regulation and Limiting
  • Thermally Enhanced Surface-Mount Package
  • Dual-H-Bridge Current-Control Motor Driver
    • Capable of Driving Two DC Motors or One
      Stepper Motor
  • Two Control Modes:
    • Built-In Indexer Logic With Simple
      STEP/DIRECTION Control and Up to
      1/32-Step Microstepping
    • PHASE/ENABLE Control, With the Ability to
      Drive External References for > 1/32-Step
      Microstepping
  • Output Current 1.5-A Continuous, 2.2-A Peak per
    H-Bridge (at VM = 5 V, 25°C)
  • Low RDS(ON): 305-mΩ HS + LS
    (at VM = 5 V, 25°C)
  • Wide Power Supply Voltage Range:
    2.5 V to 10.8 V
  • Dynamic tBLANK and Mixed Decay Modes for
    Smooth Microstepping
  • PWM Winding Current Regulation and Limiting
  • Thermally Enhanced Surface-Mount Package

The DRV8834 provides a flexible motor driver solution for toys, printers, cameras, and other mechatronic applications. The device has two H-bridge drivers, and is intended to drive a bipolar stepper motor or two DC motors.

The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current.

With proper PCB design, each H-bridge of the DRV8834 can driving up to 1.5-A RMS (or DC) continuously, at 25°C with a VM supply of 5 V. The device can support peak currents of up to 2.2 A per bridge. Current capability is reduced slightly at lower VM voltages.

Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature. A low-power sleep mode is also provided.

The DRV8834 is packaged in a 24-pin HTSSOP or VQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

The DRV8834 provides a flexible motor driver solution for toys, printers, cameras, and other mechatronic applications. The device has two H-bridge drivers, and is intended to drive a bipolar stepper motor or two DC motors.

The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current.

With proper PCB design, each H-bridge of the DRV8834 can driving up to 1.5-A RMS (or DC) continuously, at 25°C with a VM supply of 5 V. The device can support peak currents of up to 2.2 A per bridge. Current capability is reduced slightly at lower VM voltages.

Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature. A low-power sleep mode is also provided.

The DRV8834 is packaged in a 24-pin HTSSOP or VQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同，但引腳排列有所不同
DRV8845 正在供貨 采用智能調優技術的 35V、1.5A 四路 H 橋電機驅動器 Higher voltage support
DRV8846 正在供貨 具有 1/32 微步進和智能調優自適應衰減的 18V、1.4A 雙極步進電機驅動器 Higher voltage support
DRV8849 正在供貨 具有智能調優和集成電流檢測功能的 38V 1.5A 雙步進電機驅動器 Higher voltage support with 1/256 microstepping

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 10
頂層文檔 類型 標題 格式選項 下載最新的英語版本 日期
* 數據表 DRV8834 Dual-Bridge Stepper or DC Motor Driver 數據表 (Rev. D) PDF | HTML 2015年 3月 26日
應用手冊 了解電機驅動器電流額定值 (Rev. A) PDF | HTML 英語版 (Rev.A) PDF | HTML 2024年 8月 6日
應用手冊 有刷電機和步進電機電流調節的配置方法 (Rev. B) 英語版 (Rev.B) PDF | HTML 2021年 11月 29日
應用手冊 電機驅動器電路板布局的最佳實踐 (Rev. B) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 8月 5日
應用手冊 Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
應用手冊 PowerPAD? Thermally Enhanced Package (Rev. H) 2018年 7月 6日
更多文獻資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
更多文獻資料 電機驅動與控制解決方案指南 (Rev. D) 2012年 5月 30日
應用手冊 所選封裝材料的熱學和電學性質 2008年 10月 16日
應用簡報 PowerPAD? 輕松實現 (Rev. B) 2004年 5月 12日

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻