計算工具
數據表
TPS63000-Q1
- Qualified for Automotive Applications
- Up to 96% Efficiency
- 1200-mA Output Current at 3.3 V in Step Down
Mode (VIN = 3.6 V to 5.5 V) - Up to 800-mA Output Current at 3.3 V in Boost
Mode (VIN > 2.4 V) - Automatic Transition between Step Down and Boost Mode
- Device Quiescent Current Less Than 50 μA
- Input Voltage Range: 1.8 V to 5.5 V
- Adjustable Output Voltage From 1.2 V to 5.5 V
- Power Save Mode for Improved Efficiency at
Low Output Power - Forced Fixed Frequency Operation and
Synchronization Possible - Load Disconnect During Shutdown
- Over-Temperature Protection
- Available in Small 3 mm × 3 mm, QFN-10 Package
- APPLICATIONS
- All Two-Cell and Three-Cell Alkaline,
NiCd or NiMH or Single-Cell Li Battery
Powered Products - Portable Audio Players
- PDAs
- Cellular Phones
- Personal Medical Products
- White LEDs
- All Two-Cell and Three-Cell Alkaline,
PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
The TPS63000 devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800 mA. The output voltage is programmable using an external resistor divider. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin QFN PowerPAD package measuring 3 mm × 3 mm (DRC).
技術文檔
未找到結果。請清除搜索并重試。
查看全部 7 | 頂層文檔 | 類型 | 標題 | 格式選項 | 下載最新的英語版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 數據表 | High-Efficiency Single-Inductor Buck-Boost Converter With 1.8-A Switches 數據表 | 2009年 6月 24日 | |||
| 應用手冊 | QFN 和 SON PCB 連接 (Rev. C) | PDF | HTML | 英語版 (Rev.C) | PDF | HTML | 2024年 1月 5日 | |
| 應用手冊 | 使用 TPS63xxx 降壓/升壓轉換器來驅動 LED 的不同方法 (Rev. D) | PDF | HTML | 英語版 (Rev.D) | 2021年 8月 23日 | ||
| 應用手冊 | 降低直流/直流降壓/升壓轉換器輻射 EMI 的層設計 (Rev. A) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2021年 7月 16日 | |
| 應用手冊 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018年 12月 11日 | ||||
| 應用手冊 | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||||
| 模擬設計期刊 | IQ：它是什么、不是什么以及如何使用 | 英語版 | 2011年 8月 17日 |
設計與開發
如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。
評估板
TPS63000EVM-148 — TPS63000 5.5V 輸入、3.3V 輸出、1A 降壓-升壓轉換器評估模塊板
Evaluation Module Board for Buck-Boost Converter 5.5V Input, 3.3V Output, 1A
The TPS63000EVM-148 is an evaluation tool for the TPS63000 device family. It is a 96% efficient Buck/Boost Converter with an input range of 1.8 V to 5.5 V, optimized to run from a single-cell Li-Ion battery (...)
用戶指南: PDF
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VSON (DRC) | 10 | Ultra Librarian |
訂購和質量
包含信息：
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
包含信息：
- 制造廠地點
- 封裝廠地點