ZHCSCI1F November 2013 – October 2024 TXS0104E-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information
- 5.5 Electrical Characteristics
- 5.6 Timing Requirements—VCCA = 1.8 V ± 0.15 V
- 5.7 Timing Requirements—VCCA = 2.5 V ± 0.2 V
- 5.8 Timing Requirements—VCCA = 3.3 V ± 0.3 V
- 5.9 Switching Characteristics—VCCA = 1.8 V ± 0.15 V
- 5.10 Switching Characteristics—VCCA = 2.5 V ± 0.2 V
- 5.11 Switching Characteristics—VCCA = 3.3 V ± 0.3 V
- 5.12 Typical Characteristics
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10靜電放電警告
- 11術語表
- 12Revision History
- 13Mechanical, Packaging, and Orderable Information
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- RUT|12
- PW|14
- BQA|14
散熱焊盤機械數據 (封裝 | 引腳)
- BQA|14
訂購信息
7.3.1 Architecture
The TXS0104E-Q1 architecture (see Figure 7-1) does not require a direction-control signal in order to control the direction of data flow from A to B or from B to A.
Figure 7-1 Architecture of a TXS01xx CellEach A-port I/O has an internal 10-k? pullup resistor to VCCA, and each B-port I/O has an internal 10-k? pullup resistor to VCCB. The output one-shots detect rising edges on the A or B ports. During a rising edge, the one-shot turns on the PMOS transistors (T1, T2) for a short duration which speeds up the low-to-high transition.